Janome 6019QC User Manual (English)

Questions and Answers:

J
Jamie MooreAug 12, 2025
Why does the needle thread keep breaking on my Janome 6019QC Sewing Machine?
- R
  Rebecca JohnsonAug 12, 2025
  The needle thread may break due to several reasons: * The needle thread might not be threaded properly. * The needle thread tension could be too tight. * The needle might be bent or blunt. * The needle might be incorrectly inserted. * The needle thread and bobbin thread might not be set under the presser foot when you start sewing. * The threads might not have been drawn to the back after sewing. * The thread might be too heavy or too fine for the needle.
J
jackwhiteAug 16, 2025
Why is my Janome 6019QC needle breaking?
- J
  Jill JohnstonAug 16, 2025
  Needle breakage in your Janome Sewing Machine may occur if: * The needle is incorrectly inserted. * The needle clamp screw is loose. * The threads were not drawn to the back after sewing. * The needle is too fine for the fabric being used.
C
Christopher JonesAug 20, 2025
Why is my Janome 6019QC Sewing Machine so noisy?
- C
  Cathy MoralesAug 20, 2025
  Your Janome Sewing Machine might be noisy if: * Thread has been caught in the hook race. * Lint has built up in the hook race or bobbin holder.
C
Christy SchneiderAug 25, 2025
Why is the seam puckering on my Janome 6019QC?
- J
  Joseph PhillipsAug 25, 2025
  Seam puckering on your Janome Sewing Machine may occur because: * The needle thread tension is too tight. * The needle thread is not threaded properly. * The needle is too heavy for the fabric being sewn. * The stitch length is too long for the fabric; in this case, make the stitch shorter. * Foot pressure is not adequate; in this case, use a stabilizer.
H
Heather HowardAug 27, 2025
Why is the cloth not feeding smoothly in my Janome 6019QC Sewing Machine?
- M
  Michelle SpencerAug 27, 2025
  If the cloth is not feeding smoothly through your Janome Sewing Machine, it could be due to: * The feed dog being packed with lint. * The stitches being too fine; in this case, make the stitch longer. * The feed dog not being raised after 'drop feed' sewing.
M
Michael GriffithAug 31, 2025
Why are fabric layers shifting when I use my Janome 6019QC Sewing Machine?
- R
  Ronald DavisAug 31, 2025
  Fabric layers may shift when using your Janome Sewing Machine if the foot pressure is not adequate.
T
Tanya TurnerSep 3, 2025
Why are there loops on the seams of my Janome Sewing Machine?
- N
  Nathan SimonSep 3, 2025
  Loops on the seams of your Janome Sewing Machine may be caused by: * The needle thread tension being too loose. * The needle being too thick or too fine for the fabric.
S
Sarah HarperSep 7, 2025
Why is the buttonhole not sewn properly on my Janome 6019QC?
- A
  Alicia EricksonSep 7, 2025
  A buttonhole may not be sewn properly on your Janome Sewing Machine if: * The stitch density is not suitable for the fabric being sewn. * The suitable interface material has not been used for the stretch or synthetic fabric.

Janome 6019QC Specifications

General

Buttonhole Styles	7
Maximum Stitch Width	7 mm
Maximum Stitch Length	5 mm
Needle Threading System	Automatic
Needle Threader	Yes
Display	LCD
Foot Control	Yes
Weight	12 lbs
Bobbin Type	Top Drop-in
Speed Control	Yes
Built-in Free Arm	Yes