24
01234
To adjust the stitch sdensity of the buttonhole:
Adjust the stitch density within a range of .
Slide the stitch length lever toward “1” for coarser
stitch.
Slide the stitch length lever toward “0” for denser
stitch.
Stitch length lever
To adjust the stitch balance of the buttonhole:
If the stitches on each side are not balanced, adjust it
by the buttonhole pitch balance adjuster.
Move the adjuster to the right (+), if the left side is
denser than the right side.
Move the adjuster to the left (–), if the left side is
coarser than the right side.
Buttonhole pitch balance adjustor
1
2
1
2
To Next Page
Loading...
