Janome 6019QC - Shell Tucking; Fagoting

33
1
2
3
4
5
1
2
3
4
5
Shell Tucking
Machine setting
Pattern #6
Foot F: Satin stitch foot
Thread tension 6 ~ 8
Stitch width 5 ~ 6.5
Stitch length 2 ~ 3
Fold the fabric in bias. Sew along the folded edge so
that the needle on the right swing just clear the folded
edge to form tucks.
Open the fabric with the right side up and press the
tucks to one side.
NOTE: You may need to adjust the needle thread
tension to achieve the best result.
Fagoting
Machine setting
Pattern #7, 11
Foot A: Zigzag foot or F: Satin
stitch foot
Thread tension 3 ~ 6
Stitch width 5 ~ 6.5
Stitch length 0.5 ~ 1 (for Pattern #7),
Any (for Pattern #11)
1. Fold under 1.5 cm (1/2˝) on each fabric edge and
press. Pin the two edges to a piece of paper 0.3 cm
(1/8˝) apart.
2. Sew guiding the fabric so the needle catches the
folded edge on each side.
3. Peel off the paper from the fabric.
Right side of the fabric
Paper
Space (0.3 cm)
1
2
3
4
5
1
2
3
4
5
1
2
3
8
7
6
01234
5
4
3
01234
1
3
1 1
2