Janome 6019QC - UTILITY STITCHES; Straight Stitch; Starting to sew; Changing Sewing Direction

16
UTILITY STITCHES
5
4
3
01234
1
2
1
2
3
4
5
Straight Stitch
Machine setting
Pattern #2
Foot A: Zigzag foot
Thread tension 2 ~ 6
Stitch width 0 or 6.5
Stitch length 1.5 ~ 4
•
Starting to sew
Raise the presser foot and place the fabric on the
machine.
Lower the needle into the fabric where you want to
start.
Lower the presser foot and start sewing.
NOTE: To fasten the beginning of the seams, sew
several reverse stitches by pressing the
reverse stitch button.
•
Changing Sewing Direction
Stop the machine and bring the needle down into
the fabrics by turning the handwheel toward you.
Raise the presser foot.
Pivot the fabric around the needle to change the
sewing direction as desired.
Lower the presser foot and start sewing in a new
direction.
•
Fastening the seam/Tread cutter
Sew several stitches in reverse by pressing the
reverse stitch button to fasten the end of seam.
Raise the presser foot and pull the fabric to the
rear.
Draw the threads up and into the thread cutter.
The threads are cut at the proper length for starting
the next seam.
Reverse stitch button
Thread cutter
1
2
3
4
5
1
2