Janome 6019QC - Corded Buttonholes

25
Corded Buttonholes
Machine setting
Pattern 1
Foot R: Automatic buttonhole foot
Thread tension 1 ~ 5
Stitch width 4 ~ 6.5
Stitch length 0.5 ~ 1
With the buttonhole foot raised, hook the filler cord
on the cord spur on the back of the buttonhole foot.
Bring the ends toward you under the foot, and hook
the filler cord into the forks on the front of the foot
to hold them tight.
Spur
Forks
Filler cord
Lower the needle into the garment where the
buttonhole will start and lower the foot. Depress the
foot control and sew the buttonhole over the cord.
NOTE: The sewing procedure is the same as the
automatic buttonhole.
Needle thread
Bobbin thread
Buttonhole mark
Starting position
Remove the fabric and pull the left end of the cord
to tighten it. Cut the excess cord.
1
2
3
4
5
1
2
3
4
3
2
01234
3
1
2
3
6
7
4
5
1
2
3
4
5
1
2
3
1
2
3
4
5
6
7