Janome 6019QC - GETTING READY TO SEW; Connecting to the Power Supply; Controlling Sewing Speed; Reverse Stitch Button

5
Connecting to the Power Supply
1. Turn the power switch OFF.
2. Insert the machine plug into the machine socket.
3. Insert the power supply plug into the outlet.
4. Turn the power switch ON.
Power switch
Machine plug
Power supply plug
Outlet
The symbol “ ” of a switch indicates the “ OFF ”
position of a switch.
For appliances with a polarized plug (one blade is
wider than the other).
To reduce the risk of electric shock, this plug is in-
tended to fit in a polarized outlet only one way. If it
does not fit fully in the outlet, reverse the plug.
If it still does not fit, contact a qualified electrician to
install the proper outlet. Do not modify the plug in any
way.
Foot controller Model YC-482J-1 or TJC-150 is used
with sewing machine Model 6019.
Controlling Sewing Speed
Foot control:
Sewing speed is varied by the foot control.
The harder you depress the foot control, the faster the
machine runs.
Reverse Stitch Button
While the reverse stitch button is pressed, the machine
sews backwards.
Reverse stitch button
GETTING READY TO SEW
1
4
5
2
3
1
1
1
4
3
2