Janome 6234XL - · Threading the Lower Looper

0 ]
0
1
Q)
2
· Threading the Lower Looper
Open the looper cover and side cover.
Place the spool of thread on the front right side spool pin.
• The points to thread for lower looper are marked
in green.
• A convenient threading chart is placed on the
machine body inside the
looper cover.
1. Draw the thread through the right side thread guide
from back to front
CD Thread guide
2. Pass the thread through the holes on the right side
of the thread guide plate as
illustrated.
® Thread guide plate
17