Connecting
the
Machine to the Power Supply
Before connecting the machine to the power supply,
make sure the voltage and frequency shown on the
machine conform to your
electrical power.
1.
Turn off the
powei
switch, and connect the
machine
plug to the machine socket.
2.
Connect the power supply plug to your power
supply.
@
3.
Turn on the power switch.
(i) Power switch
® Machine plug
@ Machine socket
© Power supply plug
® Power supply
@ Foot control
Controlling Sewing Speed
Sewing speed can be varied by the foot control.
The harder you press on the controller, the faster the
machine runs.
Step on the foot
control with the presser foot lifter up, and
practice
controlling the speed.
(i) Foot control
For Your Safety:
• While
in
operation, always keep your eye on the
sewing area, and
do
not touch any moving parts
such as the thread
take·up lever, loopers,
handwheel, needle
or
knives.
* Always disconnect the machine from the power
supply:
- when leaving the machine unattended.
- when attaching
or
removing parts.
5
- when threading or cleaning the machine.
• Do not place anything on the foot control, otherwise
the machine
will start inadvertently.
To Next Page
Loading...
