Janome 6234XL - Setting the Lower Looper Pre-Tension Setting Slider and Changeable Thread Guide

/
2
R.H.
~
III III
STD. R.H.
... ~
( ( lIIIIII )
~
314
-
r
@)
-
@)
•
-
J
2
r---. 3/4
r
@)
•
J
@)
2
14
Setting the Lower Looper Pre-Tension Setting
Slider
and Changeable thread guide
Standard serging(STD.)
Standard serging with 2, 3 or 4 threads
CD Lower looper pre-tension setting slider
Rolled hemming(R.H.)
Rolled hemming with 2 or 3 threads
3/4 thread serglng
Serging with 3 or 4 threads
@ Changeable thread guide
2 thread serglng
Serging with 2 threads
Change the setting depending on whether you're doing 3/4
thread serging or 2 thread serging .