Janome 6234XL - Threading the Upper Looper

=
3
0
0
0
1
2
2
20
• Threading the Upper Looper
Place a spool of thread on the rear right spool pin.
* The points to thread for upper looper are marked
in red.
* A convenient threading chart is placed on the
machine body inside the
looper cover.
1. Draw the thread through the thread guide second
from the right from back to front.
CD Thread guide
2. Pass the thread through the holes in the second
row from the right of thread guide
plate as
illustrated.
® Thread guide plate
I
\