3
4
5
6, 7
1
I
I
I
8
7
3. Hold the thread at both ends and tug gently to ensure
the thread is correctly inserted between the tension
discs.
(If the presser foot lifter is raised, the thread
easily inserts between the tension discs.)
@ Upper looper thread tension dial
4. Hook the thread on the corner@, and then pass
the thread through the
looper thread guide.
© Looper thread guide
5. Pass the thread through the
looper thread
take-up lever (upper).
® Upper looper thread guide (1)
® Looper thread take-up lever (upper)
6. Pass the thread through upper
looper thread
guide (2).
7.
Holding the end
of
the thread with a pair of
tweezers, pass it through the
hole on the upper
looper. Pull
10
cm (4'') or more of thread through
the
hole.
(j)
Upper looper thread guide
(2)
@ Upper looper
To retread
the
upper looper
Turn the handwheel toward you until the upper looper
comes to the middle point of its travel, and unhook the
thread of the
lower looper from the upper looper.
Thread the upper looper.
21
CD
Lower looper thread
® Upper looper
To Next Page
Loading...
