10
MODEL: AirThread 2000D
Replacing External Parts
Rear cover
To remove :
1. Remove the face plate, the belt cover and the side
cover.
2. Remove the setscrews A (2 pcs.) on the carrying
handle.
3. Remove the setscrews B (2 cps.) from the base.
4. Loosen the setscrew C.
5. Remove the rear cover.
To attach:
Follow the above procedure in reverse.
Rear cover
Setscrew A
Setscrew B Setscrew B
Setscrew C
Thread guide
base
To Next Page
Loading...
