Janome AirThread 2000D - Base Plate

6
MODEL: AirThread 2000D
Replacing External Parts
To remove :
1. Open the side cover.
2. Remove the hinge screw (3 pcs.) and remove the
rubber soles (unit).
3. Remove the setscrew.
4. Remove the base plate.
Hinge screw
Rubber
sole (unit)
Rubber sole (unit)
Hinge screw
Rubber
sole (unit)
Setscrew
Hinge screw
To attach:
Follow the above procedure in reverse.
Base plate
Base plate
Base plate