Janome Continental M17 - Page 106

w
104
Press the twin needle key and select the desired pattern.
Patterns not suitable for twin needle sewing cannot be
selected (pattern selection keys are grayed out).
Buttonholes, specialty stitches and monogram cannot be
selected.
w
Twin needle key
NOTE:
• When you sew patterns with the twin needle, test the
stitches first eore ou se on the garment
• Use zigzag foot A or satin stitch foot F for twin
needle sewing.
• Use the threads  or finer
• When changing the sewing direction, raise the
needle and presser foot then turn the fabric (foot
up for pivoting option is not available when the twin
needle is selected).
• Use the thread cutter on the face plate when cutting
threads.
Ater tin neede seing is finished press the tin
needle key and the warning message will appear.
Press the OK key and replace the twin needle with a
single needle.