Janome Continental M17 - Common Keys & Navigation; Function Menu & Navigation Keys

21
q
Function menu key (refer to page 160)
Press this key to open the function menu.
You can select the following functions from this menu.
•
uic titch eect
•
uit oc Adisor
•
Manual Dual Feed setting
•
Machine Information
w
Home key
Press this key to enter the home window.
On the home window, press the mode selection keys
o
to enter ordinary sewing mode, sewing application mode
or embroidery mode.
e
Start page key
Press this key to go to the start page of ordinary sewing
mode, sewing application mode or embroidery mode.
r
Stitch reference key (refer to page 112)
Press the stitch reference key to show the stitch
reference chart.
t
Open le key (refer to page 127)
ress this e and the open fie indo i open ou
can open pattern combinations and monograms saved in
the machines interna memor or on a U ash drie
y
Set mode key (refer to page 165)
Press this key to enter the setting mode. You can
customize the machine settings to your preference.
The settings for “Machine Settings”, “Sewing Settings”,
“Embroidery Settings”, “Wireless LAN Settings” and
“Language Setting” are available in this mode.
u
Help key (refer to page 22)
Press this key to view the step-by-step visual guides
about essential operations.
i
Lockout key
Press this key to lockout the machine when threading the
machine, replacing the accessories etc.
To reduce the ris o injur a the uttons and es
except the lockout key, needle plate release key
!0
and
presser foot lifter button are deactivated.
To unlock the machine, press this key again.
Common Keys
CAUTION:
Do not press the visual touch screen with hard or
sharp ojects ie pencis or scredriers Use
the touch panel stylus included in the standard
accessories.
e
wq
ytr
u
i
!0
o
* This product contains eT-Kernel™ Compact RTOS of
eSOL Co., Ltd. eT-Kernel is trademark of eSOL Co.,
Ltd.