Janome Continental M17 - Manual Dual Feed Setting

w
t
e
r
q
160
INFORMATION AND CUSTOMIZING
Function Menu
Press the function menu key
q
to open the function
menu.
You can select or set the following functions from this
menu.
w
uic titch eect
e
uit oc Adisor
r
Manual Dual Feed Setting
t
Machine Information
Quick Stitch Select
You can select the stitch pattern directly with the
abbreviation of categories and numbers (refer to pages
38-39 for the category abbreviations).
ress the uic titch eect
w
to open the uic stitch
selection window.
Example:
To select utility stitch pattern 12
Press “U” to select utility stitch pattern group.
Press “1” and then “2” to select the desired stitch pattern.
Press the OK key to select utility stitch pattern 12.
NOTE:
You can not select utility and buttonhole stitch pattern
groups (“U” and “B” are grayed out), when opening the
uic stitch seection indo or programming mode
When programming a pattern combination, press the
uic titch eect
w
to open the uic stitch seection
window for programming mode.