Janome Continental M17 - Using Foot Control

z
v
q
t
r
w
y
u
e
x
c
14
Using foot control
If you wish to use the foot control, pull out the cord from
the oot contro and insert the pin connector into the jac
on the machine.
z
First make sure the power switch
q
is off.
x
Insert the machine plug
w
of the power supply cable
into the machine socket
e
.
c
Draw out the cord from the foot control and insert the
pin connector
r
into the jac
t
on the machine.
v
Insert the power supply plug
y
into the wall outlet
u
,
and turn the power switch
q
on.
q
Power switch
w
Machine plug
e
Machine socket
r
Pin connector
t
Jack
y
Power supply plug
u
Wall outlet
NOTE:
The start/stop button does not work when the foot
control is connected.