Janome HD9 - CARE & MAINTENANCE Cleaning the Hook and Feed Dog; Oiling the Machine

42
z
Remove the needle and presser foot.
x
Remove the hook cover plate
q
and open the hook
cover
w
.
c
Loosen the setscrew
e
and remove the needle plate
r
.
v
Clean the hook
t
and feed dog
y
with a lint brush
u
.
b
After cleaning the machine, attach the needle plate
r
,
needle and presser foot.
q
Hook cover plate
w
Hook cover
e
Setscrew
r
Needle plate
t
Hook
y
Feed dog
u
Lint brush
Cleaning the Hook and Feed Dog
Oiling the Machine
Oil the points as shown (
q
,
w
and
e
) with two or three
drops of oil. Use only sewing machine oil MO-70 for this
sewing machine.
Oil the machine once a day if you use the machine
frequently.
Use a soft, dry cloth to remove excess oil.
Remove the bobbin case from the hook when you oil the
hook race.
After oiling, stitch a piece of waste fabric to absorb excess
oil.
NOTE:
Unplug the machine before oiling.
r
e
q
w
u
y
t
q
w
e
CAUTION:
Turn the power switch off and unplug the machine before
cleaning.
CARE & MAINTENANCE