After installation of the body, be sure to remove the eyebolt and follow this
procedure.
After removing the eyebolt, tighten the screw provided or attach the rubber cap provided to the
eye bolt fixing hole.
Screw for the JP-104 and 204, JPH-104 and 204, JPU-104 to 1504
Rubber cap for the JP-504 and 1004, JPH-504 and 1004
z For the unit type, tighten the screw provided to the eyebolt fixing hole indicated by the
arrow.
Top of the Unit Type
Setup Electro Press JP Series 4 8
To Next Page
Loading...
