6. TEACHING DATA BACKUP
Back up data in case of accident.
To create backup data, start up the program “JP Designer Limited Edition” included in the
Operation Manual CD-ROM. Retrieve data from the machine and save the retrieved data in a
file.
The teaching data is sent and received between the machine and PC as a unit of data. You
cannot send or receive one particular program only.
<Electro Press>
<PC>
Data
Receive/Send
Work area Storage area
Backup Data
The machine has a data storage area and a work area. When you start up the machine, the
teaching data in the storage area will be copied to the work area. The copied data is used for
running and teaching. The data in the work area will be deleted when the power to the machine
is turned OFF.
When retrieving data from the machine, it comes from the work area. After sending data from
the PC to the machine, the sent data will be saved in the storage area automatically.
z If you are using “JP Designer”, the same operation can also be executed by selecting
[Receive Data] from the [Communication] pull-down menu.
Setup Electro Press JP Series 4 38
To Next Page
Loading...
