FOR YOUR SAFETY
INSTALLATION
Install an interlock as a safeguard that triggers an emergency stop
when it is activated using the I/O-S connector included in the package.
Use protective wear (helmet, protective gloves, protective glasses and
protective footwear) when installing the machine.
Place the machine on a suitable flat surface that can support its weight
and do not cover the cooling fan vent on the top of a stand-alone and head
type.
An insufficient or unstable area can cause the machine to fall, overturn,
breakdown or overheat.
Place the machine in a well-ventilated area for the health and safety of
the operator.
<Example>
Warnings
Setup Electro Press JP Series 4 iii
To Next Page
Loading...
