6
Machine setting
Darning Foot (200-117-100)
Stitch:
Thread tension: 2 - 6
Pressure adjusting dial: 1
Stitch length: Any
Stitch width: 2 - 5
Feed dogs: Dropped
Drop the feed dogs. Center the hole in the fabric on
an embroidery hoop, as shown.
Lower the darning foot and sew at a slow speed.
Move the fabric back and forth slowly until the
darning area is covered.
Turn the fabric a 1/4Ó (90 degrees), and sew another
layer of stitching over the first layer.
After darning is completed, return the pressure
adjusting dial to 3 for normal sewing.
C
To Next Page
Loading...
