z
x
q
w
e
r
t
y
u
i
(A) (B)
q
• Threading the Needle on the Right
Place the spool of thread on the spool pin second
from the left.
* The points to thread for needle on the right are
marked in blue on the overlocker.
* A convenient threading chart is placed on the
machine body inside the looper cover.
z Draw the thread through the thread guide
second from the left from back to front: (A)
* If the thread is coming out from the thread guide
groove, pass the thread through the thread guide
hole again as shown: (B)
q Thread guide
x Pass the thread through the holes in the second
row from the left of the thread guide plate as
illustrated.
w Thread guide plate
w
To Next Page
Loading...
