e
r
t
u
i
y
c
v
b
n
m
c Insert the thread between tension discs from
the right. Then pull both sides of thread.
e Right needle thread tension dial
v Turn the handwheel toward you to bring the
needle bar to its highest position, then pass the
thread through the right needle thread guide
and the thread take-up lever cover.
r Right needle thread guide
t Thread take-up lever cover
b Pass the thread through the needle thread guide
sliding the thread from left to right.
n Pass it through the needle bar thread guide
from left to right.
m Thread the right needle from front to back and
pull the thread about 10 cm (4˝) from the eye of
the needle to the back.
y Needle thread guide
u Needle bar thread guide
i Right needle
To Next Page
Loading...
