z
x
(A) (B)
q
w
q
w
e
r
t
y
u
• Threading the Needle on the Left
Place the spool of thread on the left side spool pin.
* The points to thread for needle on the left are
marked in orange on the overlocker.
* A convenient threading chart is placed on the
machine body inside the looper cover.
z Draw the thread through the thread guide on the
left from back to front: (A)
* If the thread is coming out from the thread guide
groove, pass the thread through the thread guide
hole again as shown: (B)
q Thread guide
x Pass the thread through the holes on the left of
thread guide plate as illustrated.
w Thread guide plate
To Next Page
Loading...
