Indicator light
state
Description Possible remedies
OFF
No starting up order detection (with UDE
transmitter) in "starting up area"
or
UDF modules no power supplied or badly
linked to UDR receiver.
Place the UDE transmitter in "starting up area" and aim
at the UDF module(s)
or
Verify that
UDR
receiver is power supplied
or
Verify that
UDF
module(s) is(are) well linked to
UDR
receiver
or
Contact the technical person in charge of the installation
Flashes
(during radio
remote control
startup)
The starting up procedure was correctly
executed
To Next Page
Loading...
