AAA-055-00188
Jaylor Owner Manual -9- 5000 Series Truck Mount Models
follows all the safety precautions. All accidents can be avoided. Do not risk injury or death by ignoring
good safety practices.
• Vertical mixer owners MUST give operating instructions to operators or employees before allowing
them to operate the machine, and at least annually thereafter.
• The most important safety device on this equipment is a SAFE OPERATOR. It is the operator’s
responsibility to read and understand ALL safety and operating instructions in this manual and to
FOLLOW THEM.
• Jaylor feels that a person who has not read and understood all operating and safety instructions is not
qualified to operate the machine. An untrained operator exposes himself and bystanders to possible
serious injury or death.
• Do not modify the equipment in any way. Unauthorized modification may impair the function, safety,
and life of the equipment as well as possibly voiding the warranty.
Think SAFETY! Work SAFELY!
General Safety
Read and understand this manual and all safety signs before operating, servicing, maintaining or
adjusting the vertical mixer.
Only trained competent persons shall operate the vertical mixer. An untrained operator is not
qualified to operate the machine.
Have a first-aid kit available for use should the need arise and know how to use it.
Provide a fire extinguisher for use in case of fire. Store in a highly visible place.
Do not allow riders on the vertical mixer.
Wear protective gear such as hearing protection, footwear with slip resistant soles, and the like.
Place controls in neutral, stop engine, disengage power source, set park brake, remove ignition
key and wait for all moving parts to stop before servicing, adjusting, repairing, or unplugging.
Do not operate this machinery under the influence of any alcohol, drugs or medication.
Review safety related items annually with all personnel who will be operating or maintaining the
vertical mixer.
Read and understand this manual and all safety signs before using the vertical mixer.
Place controls in neutral, stop engine, disengage power source, set park brake, remove ignition
key and wait for all moving parts to stop before servicing, adjusting, repairing, or unplugging.
To Next Page
Loading...