Jay-Lor 5425TM - 5650 Truck Mount Mixer

AAA-055-00188
Jaylor Owner Manual -37- 5000 Series Truck Mount Models
5650 Truck Mount Mixer
Main Component
Detail
Specification
Mixing Chamber
Capacity
650 cu.ft. (18.4 m
3
)
Auger Assembly
Features
Complete w/ 18 Tungsten Carbide Cutter Blades
per Auger
Frame
Features
Heavy duty, with provision for 4-point weigh scale
system.
Conveyor Assembly
Width and Type
36” (91 cm) wide, chain/slat discharge, 8’ 6” length
dual, left or right discharge options
Conveyor Drive
Assembly
Hydraulic Orbit Motor, 9.75 cu.in/rev. (160cc/rev)
Drivetrain
Driveshaft
1410 driveshaft
Working range
1500 to 1600 RPM
Horsepower
Requirement
300+ HP
* - Due to continual product development, specifications are subject to change without notice.
5750 Truck Mount Mixer
Main Component
Detail
Specification
Mixing Chamber
Capacity
740 cu ft. (21 m
3
) (w/ Standard 12” Ext.)
Auger Assembly
Features
Complete w/ 18 Tungsten Carbide Cutter Blades
per Auger
Frame
Features
Heavy duty, with provision for 4-point weigh scale
system.
Conveyor Assembly
Width and Type
36” (91 cm) wide, chain/slat discharge, 8’ 6” length
dual, left or right discharge options
Conveyor Drive
Assembly
Hydraulic Orbit Motor, 9.75 cu.in/rev. (160cc/rev)
Drivetrain
Driveshaft
1410 driveshaft
Working range
1500 to 1600 RPM
Horsepower
Requirement
300+ HP
* - Due to continual product development, specifications are subject to change without notice.