AAA-055-00188
Jaylor Owner Manual -48- 5000 Series Truck Mount Models
Filter Specification (Charge Pump Pressure Filter)
The replacement charge pump pressure filter for the hydraulic system is as follows:
Arlon
Brand – Code #CG46-CC16
This part can be ordered using Jaylor Part Number #AAB-009-00362
Cross-reference Chart for Equivalent Replacement
Charge Pump Pressure Filters
IMPORTANT: There are (2) Charge Pump Pressure Filter Assemblies on the Hydrostatic Pumps.
Remember to inspect and replace both of them when servicing.
24.8.3 Auxiliary Circuit Filter
Located on the return line near the solenoid valve assembly is a hydraulic oil filter. The filter is a ‘spin-on’
type of filter that will need replacement. Replace this filter element after 50 hours of break-in use
and every 500 hours thereafter.
Filter Specification (Auxiliary Circuit Filter)
The replacement auxiliary circuit filter for the hydraulic system is as follows:
Donaldson 079089
This part can be ordered using JAY•LOR
Part Number # AAB-008-00070
Cross-reference Chart for Equivalent Replacement
Auxiliary Circuit Filters
IMPORTANT: When replacing, inspect the filter for excessive contamination. Often, a severely
contaminated filter is indicative of required servicing of the hydraulic system.
To Next Page
Loading...