147
Do not use waxes containing high-abrasive compounds. Such waxes
remove rust and stains eectively from the paint work, but they are
also harmful to the luster of the painted surface since they scrape o
the coating. Further, they are detrimental to glossy surfaces, such as the
grille, garnish, moldings, etc. do not use gasoline or paint thinners to
remove road tar or other contamination to the painted surface.
Do not use a buer and a bung compound as it may damage the exterior
surface. Please contact a professional paint body shop for assistance.
To prevent corrosion, touch up small cracks and scratches in the paint coat as soon as
possible with touch-up lm or paint. Carefully check the body areas facing the road and the
tires for damage to the paint coat caused by ying stones, etc. Use the closest automotive
paint (available locally) match possible when touch-up paint is needed.
Use a sponge or chamois to clean plastic parts. Use warm water and a soft cloth or chamois
to remove any white residue from dark colored plastic surfaces. Do not use a scrubbing
brush, other hard tools, or wax containing abrasives as they may damage the plastic surface.
To prevent chrome parts from spotting or corroding, wash with water, dry thoroughly, and
apply a non-abrasive automotive wax. If the chrome is severely damaged or pitted, use a
commercially available chrome polish product.
Do not allow plastic to come into contact with brake uid, engine oil, grease,
paint thinner, or battery acid. These will damage plastic. Use a soft cloth and
a mild detergent solution to wipe away any such contact.
Frame
Frames will show signs of rust much sooner when exposed to salty air than in dry air. Also,
frames receive heavy abuse from road conditions such as sand, pebbles, objects in the
highway, and/or ice inhibiting chemicals, all of which will cause chipping and a blasting
eect on the painted surface. Periodically rinse o the frame (or as use requires) removing
road grime, tar, oil, mud or salt.
Refer to your Chassis Guide for the chassis manufacturer’s maintenance instructions.
Front Axle Tire Alignment
The term alignment refers to both the adjustment angles on the steering axle and suspension
and tracking of the rear axle. Many factors are considered when establishing proper alignment.
Steering components, suspension, wheel bearings and even proper loading will aect your
motor home alignment. Your motor home chassis was aligned by the manufacturer, and
weighed at our facility before shipment to your dealer. It is your responsibility to have
To Next Page
Loading...
