JB-Lighting LICON 1X - PAR Faders; FIXTURE Faders

JB-lighting Lichtanlagen GmbH Sallersteigweg 15 D-89134 Blaustein Telefon ++49(0)7304 9617-0
- 125 -
26.13 PAR faders
Faders 1-8 can be
occupied with cues (PAR
scenes) that work
according to the HTP
principle (Highest Takes
Precedence).
Additional single-channel
function during
programming (block
mode).
Banks are switched via
the flash keys with green
LEDs in combination with
the SHIFT key.
The faders C1 – C4 are used to activate pure PAR chases.
The MASTER faders regulate the output of the DMX values as illustrated below:
26.14 FIXTURE faders
Fixture faders control the brightness of fixture groups
(brightness groups).
8 faders are availabe that can be switched four times each
(SHIFT key in combination with a flash key with green
LED).
A total of 32 brightness groups is possible.