Need help?Do you have a question about the JBL Cinema 300 and is the answer not in the manual?
Frequency Response| frequency response | 32Hz – 20kHz (–6dB) |
|---|
Transducers| low-frequency transducer | 3" (75mm) PolyPlas[™] cone, video-shielded |
|---|---|
| high-frequency transducer | 1" (25mm) titanium-laminate dome, video-shielded |
Power and Impedance| recommended amplifier power | 100 watts |
|---|---|
| nominal impedance | 8 ohms |
| sensitivity | 86dB |
Dimensions and Weight| dimensions (H x W x D) | 9-1/4" x 4-3/4" x 3-3/8" (235mm x 121mm x 86mm) |
|---|---|
| weight | 2.0 lb (0.9kg) |
Transducers| low-frequency transducer | 8" (200mm) cone (down-firing) |
|---|
Power and Consumption| amplifier power | 150 watts |
|---|---|
| power requirement | 120V/60Hz, 150W (US); 220V – 240V/50Hz, 150W (EU) |
| power consumption | <1W (8mA@120V) standby; 300w (2.5A@120V) peak |
Dimensions and Weight| dimensions (W x H x D) | 19" x 14" x 14" (483mm x 355mm x 355mm) |
|---|---|
| weight | 22 lb (10kg) |
Transducers| low-frequency transducer | Two 3" (75mm) PolyPlas cones, video-shielded |
|---|---|
| high-frequency transducer | 1" (25mm) titanium-laminate dome, video-shielded |
Power and Impedance| recommended power handling | 100 watts |
|---|---|
| nominal impedance | 8 ohms |
| sensitivity | 89dB |
Dimensions and Weight| dimensions (H x W x D) | 4-7/8" x 12" x 3-3/8" (124mm x 305mm x 86mm) |
|---|---|
| weight | 3.2 lb (1.45kg) |
To Next Page
