JBL Cinema 300 - Loudspeaker Signal Processing Settings for JBL DSC260 A; Digital System Controller

35
XI. LOUDSPEAKER SIGNAL PROCESSING FOR JBL DSC260A
The following loudspeaker signal processing settings are intended for the JBL DSC260A digital system
controller.
Different loudspeaker controllers may have channel-to-channel differences in delay settings. They
may also have different denitions and implementations of parametric lter Q or bandwidth. As a result when
alternative processors are used, eld measurements, both electrically and acoustically, will ensure the maximum
performance is retained.
Note that equal voltage gain for all amplier channels is assumed. If power-ampliers with different
voltage gain are used then this difference must be compensated for.