About the Product
Product and Component Identification
11 9831/7750-1 11
Product and Component Identification
Machine
Your machine has an identification plate. The PIN (Product Identification Number), weight, engine power, year
of manufacture and serial number of the machine are shown on the identification plate. The identification plate
can be found on the front face of the seat platform.
Figure 4.
A Machine data plate B Stamped PIN
The machine model and build specification are indicated by the PIN. The PIN has 17 digits and must be read
from left to right.
Table 1. Typical PIN
PUN JT260 J H 2556351
Table 2. Explanation of the PIN
Digit Description
1 to 3 World manufacturer identification. For example, PUN = Pune Build.
4 to 8 Machine type and model. For example, JT260=CT260.
9 Random check letter. The check letter is used to verify the authenticity of a
machine's PIN.
10 Year of manufacture. For example, H = 2018.
11 to 17 Machine serial number.
Engine