Boom Ram - Removal (cont’d)
8 Remove the nuts and bolt securing the body pivot pin.
9 Knock out the pivot pin with a bar and hammer.
!!
WARNING
Metal Splinters
You can be injured by flying metal splinters when driving
metal pins in or out. Use a soft faced hammer or drift to
remove and fit metal pins. Always wear safety glasses.
INT-3-1-3
10 Lift the boom ram away from the body.
Boom Ram - Replacement
1 Use a suitable hoist and sling (the ram weighs 84 kg
(185 lb)), to position the ram over the body pivot pin.
74 - 3
Section E Hydraulics
9803/6020
Section E
74 - 3
Issue 1
Hydraulic Rams
284490
284500
284510
284520
To Next Page
Loading...
