Boom Ram - Replacement (cont’d)
2 Install the body pivot pin. Secure with the bolt and nuts.
3 Connect the hoses to the boom ram.
4 Raise the boom ram and align the boom piston rod eye
with the boom pivot point.
5 Install the pin with a bar and hammer. Secure with the
bolt and nuts.
!!
WARNING
Metal Splinters
You can be injured by flying metal splinters when driving
metal pins in or out. Use a soft faced hammer or drift to
remove and fit metal pins. Always wear safety glasses.
INT-3-1-3
74 - 4
Section E Hydraulics
9803/6020
Section E
74 - 4
Issue 1
Hydraulic Rams
284530
284540
284550
286980
To Next Page
Loading...
