Dismantling (cont’d)
9 Insert a steel rod through the drilled hole and press out
ring 18 so that it protrudes above cover 8.
10 Completely remove ring 18.
11 Insert PT 3/8 eyebolts (see Service Tools, Section 3)
into two of the plug 33 tapped holes. Lift cover 8 clear of
hub 1. If necessary tap the cover with a plastic hammer
to help release it from the hub.
12 Remove 'O' ring 29.
8 - 3
Section F Transmission
9803/6020
Section F
8 - 3
Issue 1
Track Gearbox
To Next Page
Loading...
