JDS Uniphase SmartClass E1 - Listing All Actions; Querying the States and Attributes of Multiple Actions - G2; Command; Response

Chapter 3 Action commands
Querying the states and attributes of multiple actions - g2
18 SmartClass E1 Tester Remote Control Reference Guide
current_state is a string representation of the action's current state.
next_state is a string representation of the action's next state.
Querying the states and attributes of multiple actions - g2
This command queries multiple actions for the state and attributes of each
action.
Command rc a_get_g2 action1_name action2_name …
rc a_get_g2 TestApp.Module1.Action
Response 2:SCE:cmsend:ack: a_get_g2 "<?xml
version='1.0'?><response><action
id='TestApp.Module1.Action' timestamp='1234' appli-
cable='1' executable='1'><state><current>OFF</
current><next>ON</next></state></action></response>"
Listing all actions
This command lists all of the actions within the system.
Command rc a_list
Response 2:SCE:cmsend:ack:a_list action_name action_name …
action_name