JDS Uniphase SmartClass E1 - Starting or restarting a test; Stopping a test; Timed testing

A
SmartClass E1 Tester Remote Control Reference Guide 27
Appendix A Setups
This appendix lists the setups that can be used in commands. Topics
discussed in this appendix include the following:
– “E1 BERT Setups” on page 27
– “E1 Pulse Shape Setups” on page 35
E1 BERT Setups
This section lists the setups that can be used in commands for the E1 BERT
application.
E1Bert.0.BertAuto.AutoPattern
E1Bert.0.BertRx.Pattern
E1Bert.0.BertRx.UserBitPattern
E1Bert.0.BertRx.UserBytePattern
E1Bert.0.BertTx.ErrorInsertionType
E1Bert.0.BertTx.ErrorQuantity
E1Bert.0.BertTx.ErrorRate
E1Bert.0.BertTx.Pattern
E1Bert.0.BertTx.UserBitPattern
E1Bert.0.BertTx.UserBytePattern
E1Bert.0.E1.G821.NE.OOS.Setup.Enable.ESR
E1Bert.0.E1.G821.NE.OOS.Setup.Enable.SESR