225
225 5520793D
226 5520794D
Lane crossed
When the system detects that the car
has crossed the lane line, the line on the
corresponding side flashes yellow on the
display (fig. 227, fig. 228).
227 5520881D
228 5520882D
On versions with 10" display, LaneSense
system notifications are kept visible
in the lower right corner of the display
even on screens other than the main
LaneSense system screen fig. 229.
229 5520880D
Changing the system settings
The LaneSense system has settings
to adjust the intensity of the steering
wheel torque (Low / Medium / High) and
the warning zone sensitivity (Early /
Medium / Late) that you can configure
using the Uconnect™ system screen.
Refer to the “Settings” paragraph in
the “Multimedia” section for further
information.
NOTES:
The system will not apply torque to the
steering wheel whenever a safety system
engages (ABS brakes, traction control
system, electronic stability control,
frontal collision alarm, etc.).
Use of the direction indicators and
hazard lights also suppresses the
warnings.
To Next Page
Loading...
