35
Resetting the power folding exterior mirrors
You may need to reset the power folding
mirrors if the following occurs:
The mirrors are accidentally blocked
while folding.
The mirrors are accidentally manually
folded/unfolded.
The mirrors come out of the unfolded
position.
The mirrors shake and vibrate at
normal driving speeds.
To reset the power folding mirrors,
fold and unfold them by pushing the
button (this may require multiple button
pushes). This resets them to their normal
position.
IMPORTANT The mirrors must always be
open while driving and should never be
folded.
ELECTRIC DOOR MIRROR
HEATING
(where provided)
The exterior rear-view mirror
demisting/defrosting is activated
pressing the button
on the climate
control system (control on the
dashboard or on the Uconnect™ system
touchscreen).
WARNING
52) Vehicles and other objects seen in the
passenger side convex mirror will look
smaller and farther away than they really
are. Relying too much on your passenger
side mirror could cause you to collide
with another vehicle or other object.
Use your inside mirror when judging the
size or distance of a vehicle seen in the
passenger side convex mirror.
IMPORTANT
9) To avoid damage to the mirror during
cleaning, never spray any cleaning
solution directly onto the mirror. Apply
the solution onto a clean cloth and wipe
the mirror clean.
EXTERNAL LIGHTS
34 5520727D
1. Front direction indicators (light bulbs
or LED) 2. LED daytime running lights
(DRL) and side lights 3. LED fog lights
4. Dipped beam / main beam headlights
(LED)
MULTIFUNCTION STALK
The multifunction stalk (1) fig. 35
allows you to control the operation of
the direction indicators, to select the
headlights to be switched on and the
flashes.
35 5520309D
LIGHT SWITCH
The light switch ring fig. 36, located on
the left side of the dashboard, controls
operation of daytime running lights,
parking lights, dipper beam headlights,
fog lights, rear fog lights and instrument
panel and control button dimmer.
36 5520303D
To Next Page
Loading...
