25
IMPORTANT If “Unlock all doors
1st press” is programmed all doors
will unlock when you grab hold of the
front driver’s door handle. Refer to the
"Settings" paragraph"Multimedia" section
for more information on the "Unlock
driver door 1st press" or "Unlock all
doors 1st press” selection.
Opening the passenger side door
With a valid Passive Entry key fob within
1.5 m of the passenger side door handle,
grab the front passenger side door
handle to unlock all four doors and the
liftgate automatically.
NOTE All doors will unlock when the
front passenger door handle is grabbed
regardless of the driver’s door unlock
preference setting (“Unlock driver door
1st press” or “Unlock all doors 1st
press”).
How to avoid unintentionally leaving the
Passive Entry key inside the car (FOBIK
security system)
To minimise the risk of leaving a Passive
Entry key inside the car accidentally,
the Passive Entry function features an
automatic door unlocking function which
operates if the ignition device is at
STOP.
The FOBIK security system only works
on vehicle with Passive Entry function.
There are three situations that activate
a FOBIK security system search on
vehicles with Passive Entry:
A lock request is made using the
Passive Entry key enabled with a door
open.
A lock request is made via the door
handle with Passive Entry function with
one door open.
A lock request is made via the switch
on the door panel with one door open.
When one of these situations occurs,
after all doors have been closed, the
FOBIK security system runs a search.
If the system detects a Passive Entry
key inside the car and finds no Passive
Entry key outside the car, the doors are
unlocked and an alert is sent to the
customer.
NOTE:
The doors will only be unlocked when a
Passive Entry enabled key is detected
inside the car. The car will not unlock
the doors when one of the following
conditions occurs:
The doors are locked manually using
the door locking knobs.
A Passive Entry enabled key is
detected on the outside of the car within
a 1.5 m radius from one of the door
handles with Passive Entry function.
Three attempts are made to lock the
doors using the switch located on the
door panel before closing them.
Locking/accessing the liftgate
The liftgate passive entry unlock feature
is built into the liftgate opening device
on the handle. With a valid passive entry
key within 1.5 m of the liftgate, push the
electronic liftgate release to open with
one smooth motion.
Locking liftgate
(where provided)
With a valid Passive Entry key within
1.5 m of the liftgate, push the
button
located to the right of the electronic
liftgate release device.
NOTE The Passive Entry liftgate lock
button will lock all doors and the liftgate.
The liftgate unlock function is built into
the electronic liftgate release.
Electronic liftgate release/liftgate Passive
Entry location
17 5520326D
NOTE Always take the key with you once
a door or the liftgate is locked to prevent
locking the key inside the car. If the key
has been locked inside of the car, it can
be recovered using the second provided
key.
To Next Page
Loading...
