63
phase, this will automatically be
interrupted.
The wireless charging system is enabled
when the car is in running condition and
the conventional battery is sufficiently
charged.
By interacting with the wireless charger
system and placing the mobile phone
in the specific housing, the user will
be informed by means from LED (1)
fig. 69indicating the state of the wireless
charging system:
"Your phone is being charged" blue
LED: this is displayed when the mobile
phone is positioned correctly in the
wireless charging compartment and the
system is activated correctly;
"Phone fully charged" green LED: this
is displayed when the mobile phone
has completed charging its battery (if
suitable to transmit the information);
"Object not allowed" red LED: this
is displayed when a phone that is not
enabled for wireless charging or an
object that is not permitted (e.g. the
ignition key) is placed (e.g. ignition key,
credit card, a coin);
"System error" red LED: this appears
when there is a malfunction in the
wireless charger system;
"System not active" LED off: there are
no objects in the compartment and/or
the ignition device of the car in the
STOP position and/or the doors are not
all closed correctly and the engine is not
on.
WARNING Do not place contactless
cards (RFID), credit cards or metal
objects in the charging compartment.
Correct positioning of the mobile phone
To start charging wirelessly correctly,
make sure your mobile phone is
positioned completely within the green
dotted area in fig. 69 with the display
facing up and that the device does not
cover the alert LED (1).
Correct positioning: see fig. 70;
incorrect positioning: see fig. 71;
71 5520563D
WARNING
76) Do not operate this car with a glove
box in the open position. Driving with the
glove box open may result in injury in a
collision.
77) Do not operate this car with a tunnel
compartment lid in the open position.
Driving with the tunnel compartment lid
open may result in personal injury in case
of an accident.
78) Be certain that the seat cushion
is locked securely into position before
using the seat. Otherwise, the seat
will not provide the proper stability for
passengers. An improperly secured seat
cushion could cause serious injury.
79) To prevent serious injury or death:
Only devices designed for use in this type
of socket should be inserted into any
12 Volt socket. Do not touch the power
socket with wet hands. Close the lid when
not in use and while driving the car. If
this socket is mishandled it may cause an
electric shock and failure.
To Next Page
Loading...
