14
SPX532 – QUICKSTART GUIDE
9.2. CONDITIONS TO ENABLE TRACKS
The following conditions must be respected to enable the tracks functions:
• All 4 outriggers lifted from the ground;
• Crane must be in parking position (0° or 180° ±3°);
• Main boom telescopic FULLY RETRACTED;
• Main boom angle ≤ 45°;
• NO LOAD on tip of the boom;
• If hydraulic jib is installed, it must be fully retracted.
9.3. TRACKS SCREEN APPEREANCE
If these conditions are not respected,
the icons of the levers won’t appear on
bottom of the screen and it won’t be
possible to operate the functions.
FRONT/BACK INCLINATION
[ ° ]
FRONT/BACK INCLINATION
[ % ]
LEFT/RIGHT INCLINATION
[ ° ]
LEFT/RIGHT INCLINATION
[ % ]
To Next Page
