JEKKO SPX532 - User Manual

1
SPX532 – QUICKSTART GUIDE
REVISION
1
ISSUED BY
ENRICO P.
DATE OF RELEASE
13/03/2020
REVISIONED BY
IGOR P.
DATE OF REVISION
13/03/2020
APPLIED TO
MODELS
SPD-SERIES
SPD265
SPD360
SPD500
JF-SERIES
JF30 JF40 JF365 JF545 JF990
SPX-JUNIOR
SPB209 SPX312 SPX424 SPX429
SPX-SENIOR
SPX527 SPX536 SPX1040 SPX1275
MPK-SERIES
MPK20 MPK50
NEW SERIE
SPX532 SPX1280
OTHERS
SPK 60 OTHER TOOLS INSTRUMENT
SPX532
Quickstart Guide

Summary

Turn On The Power

Release The Emergency Button

Power Unit Selection

Turn On The Remote Control

Start;Stop Diesel Engine (Or Power Pack)

Confirm LMI Configuration

Modify LMI Configuration

LMI Possible Configurations

Lists common LMI configurations for main boom and jib.

Selection Jib On Board

Selecting if the jib is installed on board for LMI calculations.

Working Mode Selection

Tracks Operation

Enable Tracks Functions

Steps to enable the track movement functions.

Outriggers Up & Down

Enable Outriggers Functions

Steps to enable the outrigger deployment and retraction functions.

Crane Operation

Enable Crane Functions

Steps to enable the crane operation functions.

Pick & Carry Mode

Enable Pick & Carry Functions

Steps to enable the Pick & Carry mode operations.

Machine Stability

Engine Power Mode Selector

Winch Speed Reduction Selector

Crane Speed Reduction Selector

Alarms & Warnings

Alarm Page

Details on the alarm page and how to clean alarms.

Warning Page

Information on the warning page and how warnings function.

Warning Block By Machine Not Enabled

Troubleshooting why a working mode cannot be enabled.

JEKKO SPX532 Specifications

General

Brand	JEKKO
Model	SPX532
Category	Construction Equipment
Language	English