38
SPX532 – QUICKSTART GUIDE
17.3. WARNING “BLOCK BY MACHINE NOT ENABLED”
Warning code: ID:1 FMI:0 SPN:1
Description: Block by machine not enabled
Effect: The working mode selected cannot be enabled
(working mode selector)
Suggestions: 1) Verify that all the conditions to enable the working mode selected are fulfilled!
2) Go into the Warning page
3) Press and hold the Start button of the remote control for few seconds
(the horn will sound): on the Warning page will be displayed one or more
warning codes to explain why the working mode selected can’t be enabled!
In this way the machine will tell you why the working mode cannot be enabled, and which is the
condition not respected!
To Next Page
