What to do if JEKKO Construction Equipment shows a thermal alarm?
If your JEKKO Construction Equipment experiences a thermal alarm, it's likely due to the overheating of the semiconductors. To resolve this, verify that the fan is working correctly.
What causes 'presence of batteries' error in JEKKO SPD265C+ Construction Equipment?
The presence of batteries error in JEKKO Construction Equipment indicates non-complying or disconnected batteries.
What causes battery current issues in JEKKO SPD265C+ Construction Equipment?
A battery current issue in JEKKO Construction Equipment may be caused by damage to the control logic.
What to do if there is a thermal alarm in my JEKKO Construction Equipment?
If you encounter a thermal alarm, it indicates that the semiconductors are overheating. Ensure the fan is working correctly to address this issue.
Why is there a battery voltage issue with my JEKKO Construction Equipment?
A battery voltage issue can arise from a loss of control of the output current, potentially caused by a disconnected battery or damage to the control logic. The suggested solution is that the battery is disconnected or there is damage to the control logic.
What causes battery current problems in JEKKO Construction Equipment?
Battery current problems can be caused by damage to the control logic.
How to fix timeout issues on JEKKO Construction Equipment?
To resolve timeout issues, check the battery capacity.
What causes thermal probe issues in JEKKO Construction Equipment?
Thermal probe issues can occur if the thermal probe is disconnected or operating outside its specified range.
How to troubleshoot selection problems in JEKKO Construction Equipment?
To troubleshoot selection problems, check the key switch position.
General| Brand | JEKKO |
|---|---|
| Model | SPD265C+ |
| Category | Construction Equipment |
| Language | English |
To Next Page
