Page 70 of 97
9 – STANDARD OPERATOR
MAINTENANCE
______________________________________________________________________________________________
Diesel engine oil
⇒ For further details about engine maintenance, see the
relative use and maintenance manual.
Please dispose of the used engine oil in a manner that is compatible
with the environment. We suggest you take it in a sealed container
to your local service station for reclamation. Do not throw it in the
trash, pour it on the ground or down a drain.
Welding
Welding must be carried out by authorized personnel, only, since some electrical devices have to
be disconnected during these operations.
9.2 Battery recharging
• Connect the feeding cable by means of the suitable plug 220V blue 110V yellow
• For the batteries to recharge, it isn’t necessary that the machine is started or that the battery
switch is on the ON position. When the connection is done, the battery charger fan starts
• When recharging the batteries, place the machine in a well-aired place in order to avoid
explosions due to the explosive gases generated by the batteries
• The battery charger starts and stops automatically
It is recommended to avoid run the batteries completely down
otherwise the recharging time would remarkably extended thus
implying the risk of damaging the batteries. Once the machine is
stabilized, connect it to the power supply as soon as possible and
operate under voltage.
To Next Page
Loading...
