Page 16 of 97
2-SAFETY INFORMATION
______________________________________________________________________________________________
BE CAREFUL!
When in the firm the same machine is to be used by more than one
operator, working instructions as well as the use and mainetance
manual must be conveyed to all the operators in charge of the
machine.
How to convey the machine instructions
Train the new operator (or the new owner) properly.
→ Make sure the operator understands instruction on safe operating and safety devices.
→ Make sure the operator understands the information pertaining the machine’s dangerous
zone and component parts.
→ Give the operating manual to the new operator (or to the new owner) and explain its
contents to him.
→ Tell him about the existence of the Declaration of Conformity and of the CE marking
→ In case of resell, give the Declaration of Conformity to the new owner, and tell him about the
hallmarks.
→ Be sure the new operator has correctly understood the instruction and has no doubts about
the machine’s functioning.
How to prove the conveyance of instructions
Considering that a proper knowledge of the machine is absolutely necessary and that the operator,
when ends its operative role, is no more responsible for it, we have prepared some forms intended
to prove the machine has been correctly picked up at the manufacturer’s site (Declaration of
responsibility) and it has been properly conveyed in case of resell.
Lacking or incorrect conveyance of instructions and of the manual
could cause involvement in (also penalty) punishment in case of
environmental damage or harm suffered by persons, things or
animals.
IN SHORT
) Inform and train the new operator
) Give him the manual and highlight safety instructions
) Fill in the form in all details and sign it
) It is in the conveyor’s interest to take and keep a copy of the page proving
the correct conveyance.
2.4 Dangerous zones
There are some very dangerous zones near the machine.
To Next Page
Loading...
Need help?
General
