Page 81 of 97
12 – TOOLS
______________________________________________________________________________________________
12 TOOLS
The tools supplied have to be installed exclusively on the jekko line
machines they have been designed and manufactured for. The
manufacturer declines all liability deriving from non-intended uses.
12.1 380V FEEDING KIT FOR SPD265C+ SPD266C+ SPD360C+
THREE-PHASE FEEDING KIT
PP380-4E
Introduction: the three-phase feeding kit PP380-4E is only used to operate the crane once the
machine is stabilized. The transfer by truck is only fed by battery with electrical motor.
To Next Page
Loading...
Need help?
General
